This Scorpion 6 F11 is Number 4 from a five-piece American-made fixed-blade run. Scorpion 6 paired an oil-quenched 1075 carbon-steel blade with satin grinds, dark black-oxide stonewashed surfaces, and a distinctive sculpted transition between the two finishes.
Sculpted black G10 scales cover the full tang, while stainless hardware secures the handle assembly. This pre-owned example remains in new condition and includes its black Kydex sheath, MOLLE attachment, signed build card, warranty card, and original packaging shown.
Collectors can explore additional work from Scorpion 6 Knives as new pieces enter the WBKC inventory.
Scorpion 6 F11 #4 of 5 American Fixed Blade
Scorpion 6 completed this F11 on May 28, 2026. The signed build card identifies it as Number 4 from a limited five-piece release.
The knife measures approximately 8.5 inches overall. Its 3.8-inch cutting edge provides more usable blade length than the narrower F2 while retaining the same manageable overall dimensions.
Moreover, the complete knife and sheath weigh approximately 7.9 ounces. The F11 therefore offers substantial full-tang construction without becoming excessively heavy.
Its broad blade, integrated guard, sculpted handle, and exposed pommel place it among modern American Fixed Blade Knives built for both serious use and small-batch collectibility.
Two-Tone 1075 Carbon-Steel Blade
Scorpion 6 used oil-quenched 1075 carbon steel for the F11 blade. The stock measures approximately 0.195 inch thick, giving the knife a substantial spine and full-tang foundation.
A broad primary grind forms the main cutting geometry. Meanwhile, an extended upper swedge narrows the blade toward the point and adds visual definition across the spine.
The cutting edge measures approximately 3.8 inches. Its gradual belly supports slicing, while the forward geometry converges into a strong, controlled point.
Near the handle, a small choil separates the sharpened edge from the ricasso. The full-width steel then forms an integrated guard before continuing through the handle.
Because 1075 is carbon steel, owners should keep the blade clean and dry after handling or use. More maintenance information appears throughout WBKC’s Knife Knowledge resources.
Sculpted Satin Grinds and Stonewashed Flats
The F11’s blade finish creates its most recognizable visual feature. Scorpion 6 left the primary grinds satin while darkening the upper surfaces with black oxide and stonewashing.
Instead of using a straight boundary between the finishes, the maker sculpted a repeating scalloped transition along the blade. This detail gives the dark upper section a layered appearance while exposing the brighter satin grind below.
Fine directional lines remain visible across both surfaces. As a result, the blade preserves the character of hand grinding beneath its muted tactical finish.
The show side carries the FG maker mark near the heel. On the opposite side, the Scorpion 6 shield appears on the satin section of the blade.
Sculpted Black G10 Full-Tang Handle
Black G10 scales form the F11 grip. Scorpion 6 sculpted the surface into broad geometric facets that create alternating raised and recessed areas along the handle.
The faceting adds texture without relying on aggressive checkering. In addition, the contour narrows near the guard and gradually opens through the center of the grip.
Two stainless fasteners secure each scale to the full tang. Their muted finish complements the black G10 and darkened steel rather than introducing a bright decorative element.
The layered G10 edges remain visible around the scale perimeter. Collectors comparing handle materials and construction methods can review How to Choose a Custom Knife.
F11 Guard, Tang, Pommel, and Lanyard Slot
The Scorpion 6 F11 fixed blade uses a full tang that remains exposed around the handle scales. This construction creates a continuous piece of steel from the blade point through the pommel.
At the front, the tang expands into an integrated guard above and below the grip. The lower section helps separate the index finger from the cutting edge, while the upper shoulder supports the knife’s angular profile.
At the rear, the exposed steel forms a squared pommel with a wide lanyard slot. Small grooves along the bottom edge add texture near the end of the handle.
A spine view also reveals the substantial tang thickness and symmetrical placement of the G10 scales. The fixed construction eliminates pivots, springs, bearings, and locking components.
Black Kydex Sheath with MOLLE Attachment
Scorpion 6 supplied Number 4 with a fitted black Kydex sheath. The molded carrier encloses the cutting edge and point while leaving the handle accessible.
Multiple eyelets surround the sheath perimeter. Consequently, the owner can adjust the carry hardware or use another compatible attachment system.
The included MOLLE attachment supports integration with webbing, packs, belts, and compatible load-bearing equipment. Its hardware mounts directly through the Kydex eyelets.
Together, the F11 and sheath weigh approximately 7.9 ounces. Therefore, the complete package remains practical for transport while protecting the blade.
Scorpion 6 F11 Product Specifications
- Maker: Scorpion 6 Knives
- Model: F11
- Production Number: 4 of 5
- Condition: Pre-Owned; New Condition
- Completion Date: May 28, 2026
- Knife Type: Fixed Blade
- Blade Steel: 1075 Carbon Steel
- Heat Treatment: Oil Quenched
- Blade Finish: Black Oxide and Stonewashed with Satin Grinds
- Blade Treatment: Sculpted Two-Tone Transition
- Cutting Edge: Approximately 3.8 Inches
- Overall Length: Approximately 8.5 Inches
- Blade Thickness: Approximately 0.195 Inch
- Blade Profile: Broad Drop-Point Profile with Extended Swedge
- Edge Type: Plain Edge
- Tang Construction: Full Tang
- Handle Material: Black G10
- Handle Finish: Sculpted and Faceted
- Hardware: Stainless Steel
- Guard: Integrated Steel Guard
- Pommel: Exposed Full-Tang Pommel
- Lanyard Opening: Integrated Slot
- Sheath: Black Kydex
- Sheath Attachment: MOLLE
- Weight with Sheath: Approximately 7.9 Ounces
- Country of Origin: United States
- Included: Kydex Sheath, MOLLE Attachment, Signed Build Card, Warranty Card, and Original Packaging Shown
Video Introduction: Scorpion 6 F11 Custom
This is the Scorpion 6 F11 Number 4 of 5, an American-made fixed blade with an oil-quenched 1075 blade, sculpted two-tone finish, satin grinds, black G10 scales, full-tang construction, and a fitted Kydex sheath with MOLLE attachment.
Scorpion 6 F11 Condition and Provenance
This example entered WBKC inventory as a pre-owned knife in new condition. The blade retains clean satin grinds, intact darkened surfaces, a sharp point, and a well-defined cutting edge.
Likewise, the sculpted G10 scales and stainless fasteners remain clean. The photographs also show the Kydex sheath, MOLLE attachment, warranty card, build card, and original presentation materials.
The signed card records:
- Model F11
- Number 4
- Sculpted two-tone 1075 blade
- Sculpted black G10 handles
- MOLLE belt attachment
- May 28, 2026 completion date
This documentation provides meaningful Provenance for the specific knife and connects Number 4 with its original material configuration.
Because the knife previously belonged to a collector, it also appears within WBKC’s selection of Preowned Knives, despite remaining in new condition.
WBKC Collector Perspective on the Scorpion 6 F11
The F11 balances a broad working profile with the visual detail expected from a small Scorpion 6 release. Its two-tone blade provides immediate contrast, yet the restrained material palette keeps the design cohesive.
Notably, the sculpted finish boundary echoes the faceted G10 handle. That repeated geometry connects the blade and grip rather than treating them as unrelated components.
The five-piece production run also gives Number 4 a clear place within the model’s history. Its signed card, sheath, and original materials strengthen that collector context.
Read Why Collectors Trust Us for more information about WBKC’s approach to condition and documentation. Owners of similar knives can also review What We Buy or begin with Sell Your Collection.
Scorpion 6 F11 Frequently Asked Questions
Is the Scorpion 6 F11 a fixed blade?
Yes. The F11 uses full-tang fixed-blade construction without a pivot or locking mechanism.
How limited is this F11?
Scorpion 6 produced this example as Number 4 from a five-piece F11 run.
What blade steel does Number 4 use?
The knife uses oil-quenched 1075 carbon steel.
What creates the two-tone blade appearance?
Scorpion 6 combined satin primary grinds with dark black-oxide and stonewashed upper surfaces. A sculpted scalloped transition separates the two treatments.
How long is the cutting edge?
The sharpened cutting edge measures approximately 3.8 inches. Overall length measures approximately 8.5 inches.
How thick is the blade?
The blade and tang measure approximately 0.195 inch thick.
What material forms the handle?
Scorpion 6 used sculpted black G10 scales secured with stainless hardware.
Does the F11 use full-tang construction?
Yes. The steel runs through the complete handle and remains exposed around the G10 scales.
What sheath comes with the knife?
The package includes a fitted black Kydex sheath with a removable MOLLE attachment.
What condition is the knife in?
This example is pre-owned and remains in new condition.
Does Number 4 include documentation?
Yes. It includes its signed May 28, 2026 build card, warranty card, Kydex sheath, MOLLE attachment, and original packaging shown.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, FL, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. WBKC is dedicated to the high-end custom knife community and support knife rights advocacy. Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Reviews
There are no reviews yet.