Jerry Hossom Crown Jewel: An 11 Inch CPM 3V Custom Recurve Fighter
This Jerry Hossom Crown Jewel is a custom full tang fixed blade, 17 inches overall. Its 11 inch recurve blade is CPM 3V. Hossom engraved J. HOSSOM, Duluth, GA on the show side. It came to us as part of a collection, in excellent condition, and it ships in its original zippered case.
Size sets it apart. Hossom has made no other knife in this style at this length. He has also announced that Blade Show 2026 would be his last as an exhibitor. And he is cutting back sharply on making knives at all.
Jerry Hossom and the Big Recurve
Jerry Hossom works in Duluth, Georgia, and he built his name on large fighters and choppers. His signature shows in the shape: deep recurves, flowing lines, oversized finger guards and handles contoured to lock the hand. He also took up CPM 3V early, before it was common, because his blades have to take hard use.
Production companies have licensed his designs. Spyderco launched a Hossom fixed blade series in 2007, with the Forester, Woodlander and Dayhiker. Fox Knives builds the Hossom Vengeance. His custom knives, though, he makes himself. For more makers at this level, see our guide to master custom knifemakers.
A Custom Hossom Fighter at Full Scale
At 17 inches overall, the Crown Jewel is the largest knife Hossom has built in this style. Even so, it weighs only 12.2 ounces. The full tang tapers toward the butt, which lightens the handle and moves the balance toward the blade.
The 6 inch handle gives a full grip behind the guard, and the 11 inch blade gives reach. For another big custom fixed blade, see the Half Face Blades Charity Bowie, a Damascus bowie with Raffir and Koa.
Jerry Hossom Crown Jewel Blade: CPM 3V Recurve With an Upper Swedge
The Jerry Hossom Crown Jewel carries an 11 inch blade with a 10.2 inch cutting edge. Near the handle the edge sweeps inward, then swells into a long belly. From there it angles up to the point, much like a tanto. Our Direware Solo tanto recurve pairs the same two shapes on a folder.
An unsharpened swedge runs along the top of the spine toward the point. Jimping cuts across the spine just ahead of the handle. The finish is satin. CPM 3V is a Crucible powder metallurgy steel made for toughness. Our Jason Clark Model 65 FL uses it too.
Green Canvas Micarta and Three Mosaic Pins
Green canvas Micarta scales cover the handle, and they sweep down into the oversized finger guard that marks Hossom’s work. The coarse canvas weave shows on every face, and it gives a sure grip, even wet. Three custom mosaic pins hold the scales to the tang. There is no lanyard hole.
Condition and What Is Included With This Jerry Hossom Crown Jewel
This Jerry Hossom Crown Jewel is in excellent condition. Our grading standards explain what that means here. It came to us as part of a collection, and it ships in its original zippered knife case. There is no Certificate of Authenticity.
- Jerry Hossom Crown Jewel Custom, CPM 3V recurve fighter, green canvas Micarta
- Original zippered knife case
Jerry Hossom Crown Jewel Specifications
The maker’s name, city and steel come from the engravings on the blade. Browse the rest of our fixed blade knives.
- Maker: Jerry Hossom Custom Knives, Duluth, Georgia
- Model: Crown Jewel Custom
- Type: Custom fixed blade fighter
- Markings: J. HOSSOM, Duluth, GA on the show side; CPM3V on the reverse
- Country of origin: USA
- Overall length: 17 in
- Blade length: 11 in
- Cutting edge: 10.2 in
- Handle length: 6 in
- Weight: 12.2 oz
- Blade steel: CPM 3V
- Blade profile: Large recurve fighter with an angled, tanto-style point
- Spine: Upper swedge; jimping ahead of the handle
- Finish: Satin
- Tang: Full, tapered
- Handle: Green canvas Micarta, with an oversized finger guard
- Hardware: Three custom mosaic pins
- Lanyard hole: None
- Condition: Preowned, excellent
- SKU: 00242-JH-CROWNJEWEL-RECURVE-CPM3V
- Included: Original zippered knife case; no Certificate of Authenticity
Video Description: A Crown Jewel for Jerry Hossom Collectors
This is the Jerry Hossom Crown Jewel Custom, a preowned fixed blade in excellent condition. Its 11 inch blade is CPM 3V, finished in satin. The recurve edge cuts for 10.2 inches. Then it angles up to the point, much like a tanto. An upper swedge runs along the spine, with jimping just ahead of the handle.
Green canvas Micarta covers the handle, shaped into Hossom’s oversized finger guard. Three custom mosaic pins hold the scales to a full tapered tang. The show side reads J. HOSSOM, Duluth, GA, and the reverse reads CPM3V. It measures 17 inches overall, with a six inch handle. It weighs 12.2 ounces and ships in its original zippered case.
Frequently Asked Questions
Is the Jerry Hossom Crown Jewel a true custom knife?
Yes. Hossom works in sole authorship, so he designed this knife and made it himself, with no factory involved. That separates his custom pieces from the Spyderco and Fox knives built to his designs.
Is Jerry Hossom still making knives?
He has announced that Blade Show 2026 would be his last as an exhibitor. He is also cutting back sharply on making knives. So new Hossom customs will be far fewer from here on, and a large one like this is rarer still.
Why does Hossom use CPM 3V?
Crucible designed CPM 3V for toughness. It holds up to impact and side load without chipping or breaking. That matters on an 11 inch blade that may chop as well as cut. Hossom took it up early for exactly that reason.
How do you sharpen a recurve knife?
Use a sharpening rod or the edge of a stone, since a flat bench stone cannot reach the concave section near the handle. Then work the belly and the angled point section as two edges, and blend them where they meet.
What does a tapered tang do?
A tapered tang thins steadily from the guard to the butt. It takes weight out of the handle and moves the balance forward, toward the blade. That is how a 17 inch knife stays at 12.2 ounces.
What is canvas Micarta?
Canvas Micarta is layers of canvas cloth bonded in phenolic resin. It is tough and stable, and its coarse weave gives a sure grip, even wet. On this knife, the green canvas shows its weave across every face of the handle.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Jerry Hossom Crown Jewel
We inspected this Jerry Hossom Crown Jewel and described it as it is: a custom recurve fighter in excellent condition. See more of his work on our Jerry Hossom Custom Knives page. And if you are refining a collection of your own, we also buy knife collections.















Reviews
There are no reviews yet.