Brian Tighe Breaker XL, an Early Frame Lock Custom
Brian Tighe came to knives with a tool and die maker’s precision, a metallurgist’s training and a photographer’s eye. This Brian Tighe Breaker XL shows all three. Its flutes are cut like tooling, its steel was chosen with care, and every curve is shaped to catch the light.
It is the large XL version of his Tighe Breaker, built on an early Titanium frame lock. The fluted blade opens by flipper or thumb stud, and his signature on the blade sits inside a window in the handle when the knife is closed.
Brian Tighe, Custom Folder Maker of Ridgeville, Ontario
Tighe works in Ridgeville, Ontario, and has built custom tactical knives for more than three decades. He is a member of the Knifemakers’ Guild. His knives have appeared on the covers of BLADE, Knives Illustrated and Tactical Knives, and in David Darom’s The World of Art Knives.
He won Most Innovative Design at the BLADE Show in 2010 and again in 2012. He has also designed for CRKT, including its limited 20th anniversary Buy Tighe, and for Spyderco. In 2016 he launched Brian Tighe & Friends, whose Tighe Breaker Integral Automatic took Most Innovative Design in 2017. For one of his automatics, see our Brian Tighe Twist OTF.
The Brian Tighe Breaker XL Blade in BG-42
The Brian Tighe Breaker XL blade is BG-42 Stainless Steel. Carpenter Technology describes BG-42 as a double vacuum melted, martensitic stainless high speed steel with excellent wear and corrosion resistance. It is also a bearing steel, made to the AMS 5749 specification.
Sweeping flutes run along the upper bevel on both sides, echoing the flutes of the handle. The primary bevels carry a vertical satin finish, while the flutes show a contrasting satin. Tighe’s script signature sits mid-bevel on the show side. Close the knife and it lines up inside the scalloped window of the handle.
Sculpted Titanium Frame Lock, Flipper and Thumb Studs
The handle is a Titanium frame lock, milled in deep, sweeping flutes that flow back from the pivot like a wing. A finger groove sits behind the flipper tab, and a lanyard hole goes through the butt. You can open the blade with the integral flipper tab or with either of the stepped thumb studs.
The pivot runs on Tighe’s Sealed Thrust Bearing System, held by stainless Torx hardware. Meanwhile, a milled satin Titanium clip carries his signature and mounts by the pivot for right-hand, tip-down carry. For another custom Titanium frame lock, see our Reese Weiland Strike Prototype 2.
Condition and What Is Included With This Brian Tighe Breaker XL
This knife is in excellent condition, with no signs of wear. It came to us from a collector, along with its knife pouch. Before you compare it with other Tighe Breakers, see how we grade condition.
Tighe issued no certificate for this knife. Instead, his signature on the blade and the clip is the maker’s mark, and it is part of the knife’s provenance.
- Brian Tighe Custom Tighe Breaker XL
- Knife pouch
Brian Tighe Breaker XL Specifications
See the rest of our collector folding knives.
- Maker: Brian Tighe Custom Knives, Ridgeville, Ontario, Canada
- Model: Tighe Breaker XL, early-generation frame lock
- Type: Folding knife, manual
- Deployment: Integral flipper tab and dual stepped thumb studs
- Lock: Titanium frame lock
- Overall length: 9.75 in
- Blade length: 4.25 in
- Closed length: 5.5 in
- Weight: 5.8 oz
- Blade steel: BG-42 Stainless Steel
- Blade finish: Vertical satin on the primary bevels, contrasting satin inside the sculpted flutes
- Handle: Sculpted, fluted Titanium frame with lanyard hole
- Pivot: Sealed Thrust Bearing System with stainless Torx hardware
- Clip: Milled satin Titanium, right-hand tip-down, engraved with Tighe’s signature
- Markings: Brian Tighe script signature on the show side of the blade and on the clip
- Date made: Not known
- Condition: Excellent, no signs of wear
- Included: Knife pouch (the maker issued no COA)
- SKU: 00267-BT-BREAKERXL-FRAMELOCK-BG42
Video Description: Tighe Breaker XL Custom
Few makers sculpt Titanium the way this one does, and photos can only hint at it. Watch the light travel across the wing-like flutes as the knife turns. Then see the flipper fire, the lock engage and the signature slide into its window as the blade folds away. So watch this Brian Tighe Breaker XL before you decide.
Frequently Asked Questions
What is BG-42 steel?
BG-42 is a double vacuum melted, martensitic stainless high speed steel, made today by Carpenter Technology. It is also a bearing steel. Its makers stress wear and corrosion resistance, which suit a knife blade well.
How does the Brian Tighe Breaker XL open and lock?
Press the integral flipper tab, or push either stepped thumb stud, and the blade swings out on its bearing pivot. Then the Titanium frame lock moves in behind the blade to hold it open.
What awards has Brian Tighe won?
He won Most Innovative Design at the BLADE Show in 2010 and 2012. His Brian Tighe & Friends line won the same award in 2017 for the first Tighe Breaker Integral Automatic.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Brian Tighe Breaker XL
We inspected this Brian Tighe Breaker XL before listing it. It is exactly as described: excellent, with no signs of wear, and complete with its pouch. See more from the maker on our Brian Tighe Custom Knives page. And if you have collector knives of your own to place, we also buy knife collections.
















Reviews
There are no reviews yet.