Burn Knives Vengeance Damascus: A Switchblade Restorer’s Gothic OTF
Every Burn Knives Vengeance Damascus traces back to a broken Italian stiletto. Paul Panak’s father gave him one with a dead spring, and fixing it hooked him on how automatics work. He went on to restore antique switchblades for dealers. That work taught him each mechanism from the inside out, and it shaped everything he builds now.
This one is a custom double-action OTF with a Wavepool Stainless Damascus dagger blade and eight Timascus inlays in a solid Stainless Steel chassis. A Sterling Silver skull looks out from under a Damascus Spartan helmet on the show side. Panak signed and dated its handwritten certificate.
Paul Panak and the Burn Knives Shop
Panak has built knives for more than 26 years, and he earned his name with custom automatics. He carried what restoration taught him into his own designs, then founded Burn Knives. Today he handles every step himself in his shop in Ozark, Missouri. His card states his specialty plainly: Italian stilettos and double-action OTF automatics.
Burn Knives also turns away from the trend toward small, light pocket knives. Panak’s flagship double-action OTFs, the Vengeance, Razor and Mamba, often start as solid blocks of 416 Stainless Steel or 7075 Aluminum. Many of them weigh close to a full pound. Our earlier Burn Knives Vengeance with a 154CM tanto blade shows the model in a plainer build.
A Sterling Silver Skull Under a Damascus Spartan Helmet
The showpiece sits near the butt of the show side. Panak set a solid Sterling Silver skull into the chassis, then capped it with a Spartan helmet carved from the same Wavepool Damascus as the blade. The helmet’s layers run in tight lines down its cheek guards. Beneath it, the silver skull grins out through the eye slots and the open face.
His certificate describes it in his own hand, as a Sterling Silver skull head under the helmet. Panak builds themed pieces like this often, and our Burn Knives Picklock with a samurai theme carries the same instinct into an Italian picklock.
Burn Knives Vengeance Damascus Blade and Double Action
The Burn Knives Vengeance Damascus fires a 5 inch hollow-ground dagger blade in Wavepool Stainless Damascus. Both edges are sharpened, and a center ridge runs straight to the point. The pattern ripples in tight, rounded rings across both faces of the blade.
A double-action mechanism drives the blade both ways. Push the milled, stepped thumb slide forward and the blade fires, then pull it back and the blade retracts. It fires crisply, and the blade locks up with no play. For another double-action OTF dagger, see our Hawk Deadlock Model C in CPM 20CV.
Timascus Inlays in a Solid 416 Stainless Steel Chassis
Panak milled the chassis from solid 416 Stainless Steel, with a brushed finish and faceted edges. Eight Timascus inlays sit in it, four on each face, each held by small screws. Their layers show bronze, gold and blue tones against the steel. Our Hypercut Dharma pairs Mike Norris Damascus with Black Timascus in a very different automatic.
All that steel gives the Vengeance real weight in the hand, at 15.5 ounces. Even so, the chassis narrows at the waist between the inlay pairs, so the grip still finds its place.
Condition and What Is Included With This Burn Knives Vengeance Damascus
This Burn Knives Vengeance Damascus is in excellent condition. Our grading standards explain what that means here. We purchased it from a private seller, and it comes with Panak’s handwritten Certificate of Authenticity, signed by the maker.
- Burn Knives Vengeance D/A OTF Custom, Wavepool Stainless Damascus blade and Spartan helmet
- Handwritten Certificate of Authenticity, signed by Paul Panak
- Burn Knives contact card
- Zippered knife case
- Leather slip case
Burn Knives Vengeance Damascus Specifications
The model, materials and build date come from Panak’s handwritten Certificate of Authenticity. Browse the rest of our automatic knives.
- Maker: Burn Knives by Paul Panak, Ozark, Missouri
- Model: Vengeance D/A OTF Custom
- Type: Custom double-action out-the-front automatic
- Built: June 5, 2025, per the certificate
- Country of origin: USA
- Overall length: 11.4 in
- Blade length: 5 in
- Cutting edge: 5 in
- Handle length: 6.4 in
- Handle thickness: 0.76 in
- Weight: 15.5 oz
- Blade steel: Wavepool Stainless Damascus
- Blade profile: Double-edged dagger
- Grind: Hollow ground
- Action: Double action, thumb slide fires and retracts the blade
- Lock: Internal OTF lock
- Chassis: Solid 416 Stainless Steel, brushed
- Inlays: Eight Timascus, four on each face
- Accent: Sterling Silver skull under a Wavepool Damascus Spartan helmet, show side
- Pocket clip: None
- Condition: Preowned, excellent; one small blemish on one Timascus inlay
- Included: Signed handwritten Certificate of Authenticity, Burn Knives contact card, zippered knife case and leather slip case
- SKU: 00246-BURN-VENGEANCE-DAOTF-WAVEPOOL-20250605
Video Description
A double-action OTF is judged by its action, and no photograph can show that. Collectors look for a clean fire and an equally clean return. The Spartan helmet also rewards a slow turn, because light finds the silver skull beneath the Damascus. Panak built this Vengeance as a single custom, so no other carries this helmet over this skull.
Frequently Asked Questions
What does D/A OTF mean?
D/A OTF stands for double-action out-the-front. The blade travels straight out of the front of the handle, and one thumb slide both fires it and retracts it. A single-action OTF fires on the slide but has to be pulled back by hand.
What is Timascus?
Timascus is a layered Titanium material, made by bonding sheets of different Titanium alloys into one billet. Heat brings out the layers in bronze, gold and blue tones. Because every billet patterns differently, no two inlays ever match.
What is the Spartan helmet on this knife made of?
The helmet is Wavepool Stainless Damascus, the same steel as the blade. Under it sits a solid Sterling Silver skull. Panak set both into the show side of the chassis, near the butt.
Why is the Vengeance so heavy?
Panak builds his flagship OTFs from solid blocks of metal, and this chassis is 416 Stainless Steel. That mass makes the knife feel planted in the hand. It also gives a long blade a stable platform to fire from.
Is the Burn Knives Vengeance Damascus a true custom?
Yes. Panak handles every step himself, from the chassis to the final fitting of the firing mechanism. He documented this build on a handwritten Certificate of Authenticity and signed it.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Burn Knives Vengeance Damascus
We inspected this Burn Knives Vengeance Damascus and described it as it is: a one-off custom OTF in excellent condition, with its signed certificate. See more of his work on our Burn Knives by Paul Panak page. And if you are refining a collection of your own, we also buy knife collections.
Automatic Knife Legal Notice
This is an automatic knife. Laws governing purchase, possession, and carry vary by state, county, and municipality.
The buyer must know and follow the laws that apply where they live before ordering. We do not give legal advice. For current state-by-state information, consult the American Knife and Tool Institute.















Reviews
There are no reviews yet.