Neels van den Berg Spike Axe From Black Dragon Forge
Neels van den Berg found his way to the anvil through a medieval festival. Soon after, he took a forging class with the smith Stuart Smith. By 2013 he was forging full time at Black Dragon Forge, his shop in Lanseria, South Africa. This Neels van den Berg Spike Axe is his work, forged by hand and hung on African Blackwood.
A bearded bit sits on one side of the head, and a faceted spike balances it on the other. On top of the eye, his stamp carries the letters JS.
Neels van den Berg, ABS Master Smith
Neels founded Black Dragon Forge in 2009. In February 2014 he passed the American Bladesmith Society’s Journeyman Smith performance test. Master Smiths Kevin and Heather Harvey tested him at their studio in Belfast, South Africa. The ABS then awarded his Journeyman Smith stamp in June 2016, and in 2017 he joined the Knifemakers’ Guild of Southern Africa.
At the 2022 BLADE Show in Atlanta, he earned his Master Smith stamp. His test piece, the Leaf Dagger, also won the B.R. Hughes Award for the best knife by a Master Smith applicant. In 2025 he went on to become an ABS Master Smith judge.
His approach follows the Japanese principle of Kodawari, an uncompromising pursuit of perfection in every detail. His business card puts it in three words: Practical, Performance, Quality. For the wider circle he works in, read our guide to master custom knifemakers.
The Neels van den Berg Spike Axe Head in 5160
The Neels van den Berg Spike Axe head is forged 5160, a carbon spring steel that smiths favor for tools that take hard blows. He finished its flats and primary bevels in satin. Along the bit, a polished edge bevel runs bright against the satin.
The bit is bearded, so its lower corner sweeps down below the eye. It carries 3.75 inches of cutting edge. Between the bit and the eye, a fluted neck steps in with raised bands. Measured from the edge to the tip of the spike, the head runs 8.75 inches.
Behind the faceted eye, a narrow waist leads to a faceted spike that tapers to a slightly curved point. Neels has also made a one-piece tactical axe, the DragonHawk, ground from VRN500 plate with G10 scales. This piece, by contrast, is a separate forged head on a wooden haft. For a one-piece spike hawk in CPM 3V, compare our Rick Barrett Plague Hawk.
African Blackwood Haft and the JS Stamp
The haft is African Blackwood, dense and dark, shaped with flat facets along its 16 inch length. A row of finger grooves runs along its front edge just below the bit. At the butt, the haft flares into a faceted knob.
The haft meets the head at the eye, and a Brass pin shows on each side of the eye. On top of the eye, a round steel cap carries his stamp: the Black Dragon Forge logo above the letters JS. The same logo appears on his business card.
JS stands for Journeyman Smith, the ABS rating a smith earns before Master Smith. Complete, the axe weighs 2 lb 1 oz. For a traditional hawk in twist Damascus and curly maple, see our Larry Pridgen Tomahawk.
Condition and What Is Included With This Neels van den Berg Spike Axe
This Neels van den Berg Spike Axe is preowned and in excellent condition. It came to us from a collection. Faint tooling marks show on the back side of the head, on the spike and around the top of the eye. Before you compare it with other hawks, see how we grade condition.
It ships in a black zippered padded case, with a black leather edge cover that snaps over the eye. The original Black Dragon Forge paperwork comes with it, and a maker’s own card adds to a piece’s provenance. There is no Certificate of Authenticity.
- Neels van den Berg forged spike axe
- Black leather edge cover with snap strap
- Black zippered padded case
- Embroidered Black Dragon Forge logo patch
- Original Carbon Knife Care Instructions card
- Neels van den Berg business card
Neels van den Berg Spike Axe Custom Specifications
See the rest of our custom tomahawks and axes.
- Maker: Neels van den Berg, Black Dragon Forge, Lanseria, South Africa
- Model: Forged Spike Axe Custom
- Type: Custom forged spike axe (tomahawk)
- Date made: Not recorded
- Overall length: 17.5 in
- Cutting edge: 3.75 in
- Head length: 8.75 in, from the edge to the spike point
- Haft length: 16 in
- Weight: 2 lb 1 oz
- Head steel: 5160
- Head: Hand-forged; bearded bit; fluted neck; faceted eye; faceted rear spike; Brass pin through the eye
- Finish: Satin on the flats and primary bevels; polished edge bevel
- Haft: African Blackwood, faceted, finger grooves below the head, flared butt knob
- Maker’s mark: Black Dragon Forge logo above JS, stamped on a round steel cap on top of the eye
- Condition: Preowned, excellent; faint tooling marks on the back side of the spike and around the top of the eye
- Included: Leather edge cover, zippered padded case, embroidered Black Dragon Forge patch, Carbon Knife Care Instructions card and business card; no Certificate of Authenticity
- SKU: 00259-NVDB-SPIKEAXE-BLACKWOOD-5160
Video Description: Black Dragon Forge Spike Axe Custom
A forged head changes character as it turns. The soft gray satin gives way to one bright line along the edge, and each facet of the spike catches the sun in turn. The dark haft shows its grain only in motion. Collectors of hand-forged hawks want to see all of that before they commit. So watch this Neels van den Berg Spike Axe turn in the light.
Frequently Asked Questions
What does the JS stamp on this Neels van den Berg Spike Axe mean?
JS stands for Journeyman Smith, a rating from the American Bladesmith Society. Neels stamped it below the Black Dragon Forge logo on a steel cap at the top of the eye. Today he holds the higher Master Smith rating.
Is a spike axe a tomahawk?
In practice, yes. A tomahawk is a light, one-handed axe, and a spike or hammer often backs its bit. This one pairs a bearded bit with a rear spike, so collectors group it with spike tomahawks.
What is 5160 steel?
It is a carbon spring steel with a small addition of chromium, widely used for vehicle leaf springs. Smiths forge it into axes and large blades because it stays tough under impact. Like any carbon steel, it needs a light coat of oil to keep rust away.
What is African Blackwood?
African Blackwood, also called mpingo, is a very dense, oily hardwood from the dry regions of Africa. Woodwind makers use it for clarinets and oboes. It finishes smooth and takes hard handling well, which suits an axe haft.
What makes this Neels van den Berg Spike Axe a true custom?
A true custom comes from one maker who forges and finishes it in his own shop, not from a factory. Neels forged this head himself and stamped it with his own mark. Our guide to choosing a custom knife covers what else to weigh.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Neels van den Berg Spike Axe
We inspected this Neels van den Berg Spike Axe before listing it, and it is exactly as described: preowned, excellent and complete with its edge cover, case and Black Dragon Forge paperwork. See more of his work on our Neels van den Berg (Black Dragon Forge) page. And if you have custom hawks of your own to place, we also buy knife collections.














Reviews
There are no reviews yet.