Billy Mace Imel Dagger: A Custom Integral Interframe Dagger in Mammoth Tooth
This Billy Mace Imel dagger is a custom integral interframe dagger, made from one solid piece of 440C. Blade, guard and handle frame are the same steel, so there are no pins, no screws and no joints in the metal. A black mirror finish covers the whole piece, and Mammoth Tooth fills the handle on both sides.
Imel entered the BLADE Magazine Cutlery Hall of Fame in 2021. BLADE singled out his sleek stainless daggers as the work he is best known for, and this is one of them. It came to us from an estate collection in excellent condition, with its Treestump Leather sheath.
Billy Mace Imel, From Tool and Die to the Hall of Fame
Billy Mace Imel trained as a tool and die maker before he made knives. In 1972, getting ready for a hunting trip, he admired a Ted Dowell integral hunter but couldn’t justify its $100 price. So he used his machining skill to build his own. By 1973 he was a dedicated custom maker.
He spent 43 years in the Knifemakers’ Guild and served as its secretary for 15 of them. His wife, Beverly, also served for many years as the Guild’s secretary-treasurer. In 2021 the two entered the Cutlery Hall of Fame together, the first pair ever inducted at the same time.
His work is on permanent display at the Smithsonian Institution in Washington, D.C. In 1983 he built a custom knife for then Vice President George H.W. Bush. For more on the makers collectors rank at this level, see our guide to master custom knifemakers.
Integral Construction From One Bar of 440C
An integral knife starts as a single bar of steel. Imel machined and hand-filed the blade, guard and frame from it, so nothing is assembled and nothing can work loose. That takes far longer than fitting separate parts, and a mistake late in the work can cost the whole piece.
The handle is an interframe. Imel milled a pocket into each face of the steel frame and set a slab of Mammoth Tooth into it, so a steel border runs around each inlay. For another interframe, built as a folder, see the Curt Zimmermann Ranch Hand.
At the front, the guard’s two short quillons each carry a rounded notch. At the back, the frame flares into a squared pommel. Imel engraved his name along the spine of the handle, and he left both faces clean.
Trusted by knifemakers for decades, 440C is a time-tested steel that achieves a durable 60 HRC while offering the exceptional corrosion resistance needed to keep your blade looking flawless.
Mammoth Tooth and the Black Mirror Finish
Mammoth Tooth is the fossil molar of the woolly Mammoth, enamel and dentine rather than tusk. Both inlays here are richly figured, and no two slabs ever match. The same material also handles the Holley Knife Company fixed blade with Mammoth Tooth.
A black mirror finish covers the entire integral piece, blade and frame alike. Because blade and frame are one piece of steel, the finish runs unbroken from point to pommel. A dark mirror shows every flaw beneath it, so the polish underneath has to be perfect first. Against it, the Mammoth Tooth reads brighter still.
Billy Mace Imel Dagger Blade and Hollow Grinds
The blade of this Billy Mace Imel dagger is a symmetrical double-edged dagger, 5.4 inches long. Its cutting edge runs 5.3 inches. Deep hollow grinds run down both faces and meet at a center ridge. As a result, the edges stay thin while the ridge keeps the blade stiff.
440C is a high-carbon Stainless Steel, with about 1 percent carbon and 16 to 18 percent chromium. Heat-treated, it reaches about 60 on the Rockwell C scale, the highest hardness of any standard stainless. For a fixed blade dagger in a tool steel instead, compare the J.B. Stout Stengah Dagger in A2.
Condition and What Is Included With This Billy Mace Imel Dagger
This Billy Mace Imel dagger is in excellent condition, with no flaws or blemishes. It came to us from an estate collection. Our grading standards explain what excellent means here. It comes with no Certificate of Authenticity.
- Billy Mace Imel custom integral interframe dagger, 440C, Mammoth Tooth inlays
- Black leather dagger sheath, made and stamped by Chris Kravitt of Treestump Leather, Waltham, Maine
- Soft zippered case
Billy Mace Imel Dagger Specifications
The maker’s name comes from his engraving on the spine of the handle. Compare this dagger with the rest of our fixed blade knives.
- Maker: Billy Mace Imel
- Model: Custom Integral Interframe Dagger
- Type: Custom fixed blade dagger, integral construction
- Markings: Billy Mace Imel, engraved along the spine of the handle
- Country of origin: USA
- Overall length: 9.9 in
- Blade length: 5.4 in
- Cutting edge: 5.3 in
- Handle length: 4.5 in
- Weight: 4.3 oz
- Blade steel: 440C
- Blade profile: Double-edged dagger
- Grind: Deep hollow grind on both faces, center ridge
- Edge: Plain, sharpened on both sides
- Finish: Black mirror finish, blade and frame
- Guard: Integral, two short quillons with rounded notches
- Handle: Integral steel interframe, one piece with the blade, no pins or screws
- Inlays: Mammoth Tooth, both sides
- Pommel: Flared and squared
- Condition: Preowned, excellent, no flaws or blemishes
- Provenance: Estate collection
- SKU: 00239-BMI-INTEGRALDAGGER-MAMTOOTH-440C
- Included: Treestump Leather sheath by Chris Kravitt and a soft zippered case; no Certificate of Authenticity
Video Description: A Dagger Like No Other
This is a Billy Mace Imel custom integral interframe dagger, preowned and in excellent condition. Imel made the blade, guard and frame from one solid piece of 440C. The 5.4 inch double-edged blade carries deep hollow grinds. A black mirror finish covers blade and frame alike. Mammoth Tooth inlays sit in pockets milled into both faces.
There are no pins or screws anywhere in the steel. Two short quillons with rounded notches form the guard, and the frame flares at the pommel. Imel engraved his name along the spine of the handle. It measures 9.9 inches overall and weighs 4.3 ounces. It ships with a Treestump Leather sheath and a soft zippered case.
Frequently Asked Questions
What is an integral knife?
An integral knife is made from one piece of steel. The blade, guard and handle frame are machined and filed from a single bar, rather than joined from separate parts. Since there are no seams to open, collectors prize integrals for their strength and for the work they demand.
Is 440C steel good for knives?
Yes. 440C carries about 1 percent carbon and 16 to 18 percent chromium, so it hardens to about 60 HRC and still resists corrosion. Makers have used it for high-quality blades for decades, and it suits a dagger built to keep its finish.
What is Mammoth Tooth?
Mammoth Tooth is the fossil molar of the woolly Mammoth, cut into slabs for knife handles. It is enamel and dentine rather than tusk, so it is a different material from Mammoth Tusk. Each slab carries its own figure, which makes every handle one of a kind.
Is this dagger a true custom?
Yes. Imel trained as a tool and die maker and worked in sole authorship, machining and hand-finishing each knife himself rather than using CNC. A custom in this sense is one maker’s handwork from bar to finish, so his yearly output stayed small.
Who made the sheath?
Chris Kravitt of Treestump Leather, in Waltham, Maine, made the black leather sheath and stamped it with his mark. It carries a tooled border and a belt loop on the back. The dagger also ships in a soft zippered case.
Is this Billy Mace Imel dagger legal to own?
It depends on where you live. Laws on double-edged knives and daggers vary by state, county and city, and some limit carry rather than ownership. So check your own before ordering. The American Knife and Tool Institute publishes current state-by-state information.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Billy Mace Imel Dagger
We inspected this Billy Mace Imel dagger and described it as it is: a custom integral interframe dagger in excellent condition, from an estate collection. See more of his work on our Billy Mace Imel Custom Knives page. And if you are settling or refining a collection of your own, we also buy knife collections.
Woolly Mammoth Tooth Compliance Notice
The mammoth material on this knife is fossil woolly mammoth tooth. Tooth is enamel and dentine rather than tusk, and it is not ivory. No living or endangered animal is involved.
Several States restrict the sale and possession of ivory materials. Some of those statutes are written broadly enough that a buyer should confirm how their own state treats fossil mammoth material of any kind. It is the buyer’s responsibility to know and understand the current laws in the State they reside.
Contact us with any questions and we will help where we can.


















Reviews
There are no reviews yet.