Rick Barrett Plague Hawk: A Swordsmith’s Custom Tomahawk
The Rick Barrett Plague Hawk comes from a smith who built his own forge as a teenager. By 16 he was forging his own blades, and he was already trying traditional clay tempering. That path led him to Japanese swords, and then to smelting his own steel from iron sand. Yet Barrett also builds modern pieces, and this custom tomahawk shows that side of his work.
It follows the design Knives Illustrated featured in its May 2013 issue. A head of 1/4 inch CPM 3V carries Barrett’s Plague milling, and a sculpted black G10 handle runs down to a hooked butt.
From Tamahagane to Tool Steel
By 2013, in his own words, Barrett had been obsessed with the Japanese sword for over twenty years. He began as a teenager, joining sword study groups and attending shows such as Token Kai around the country. For his Japanese swords he used only orishigane or tamahagane he smelted himself. For cutting blades he also used 1075, W1 and W2.
He described his shop plainly, too. He fired his forge and his hand-built smelter with propane, and he shaped with a 115 pound air hammer. He also worked without apprentices.
His tactical work runs the other way. There he uses modern steels such as CPM 3V and S35VN, with G10 or Micarta for the handles. His Fallout frame lock folders come from that same side of the shop.
The Rick Barrett Plague Hawk in Knives Illustrated
The May 2013 issue gave the hawk its own heading, and the writer ranked it first among the Barrett pieces seen to that point. A photo caption gave Barrett’s own name for the design: Plague Hawk Spike. Collectors also call it the Plague Axe.
The article described a hawk of more than 17 inches, with a head over 8 1/2 inches. It gave the main cutting edge as 4 1/2 inches, cut from 1/4 inch 3V. Then it added that the hawk borders on being a battleaxe, and that some would argue it is.
The magazine also noted that the back spike on that hawk was razor sharp. Barrett sharpened the spike on only one Plague Hawk, and he kept that hawk. So this sister piece has a back spike with no edge.
The Plague 3D-Milled Head
Barrett’s Plague pattern covers both flats of the head. A raised web of ridges runs across it, with recessed cells between them, and it carries onto the back spike. The milling works in three dimensions, so the web stands proud of the steel instead of sitting on its surface.
Along the cutting edge, satin primary bevels break the web and frame the bit in plain steel. Three-dimensional milling also shapes the topographic G10 on our NADEN Knives Mansum, but here the cutter works the steel head itself.
Rick Barrett Plague Hawk Head in 1/4 Inch CPM 3V
The Rick Barrett Plague Hawk head is 1/4 inch CPM 3V, one of the steels Knives Illustrated listed for his tactical work. Crucible designed it for maximum resistance to breakage and chipping.
Crucible rates its impact toughness above A2 and D2, and close to the shock-resistant S7. It carries about 0.8% carbon, 7.5% chromium and 2.75% vanadium. Its vanadium carbides give it wear resistance similar to D2, so it still holds an edge.
On this hawk the main cutting edge runs 4.5 inches, and the blade stands 4.1 inches tall. The head width is 8.5 inches. For CPM 3V in a fighter instead, see our Jerry Hossom Crown Jewel.
Sculpted G10 Handle and Kydex Sheath
The handle is black G10, sculpted along its length and 0.7 inch thick. Flush-mounted Torx screws hold it, and the butt flares into a hook with an integrated lanyard hole. Sculpted G10 also dresses our Scorpion 6 F11 fixed blade.
The whole piece is 17.25 inches long and weighs 2 lb 10 oz. A Carbon Fiber pattern Kydex sheath covers the bit, and a row of eyelets runs around its edge. For a traditional contrast, our Half Face Blades Bleeding Heart Hawk pairs its head with dyed giraffe bone and teak.
Condition and What Is Included With This Rick Barrett Plague Hawk
This Rick Barrett Plague Hawk is preowned and in excellent condition, with no signs of wear. It came to us from a collection. Before you compare it with other hawks, see how we grade condition.
It ships with its Carbon Fiber pattern Kydex sheath. There is no Certificate of Authenticity.
- Rick Barrett Plague Hawk custom tomahawk
- Carbon Fiber pattern Kydex sheath
Rick Barrett Plague Hawk Specifications
See every hawk we carry on our tomahawks page.
- Maker: Rick Barrett, Rick Barrett Custom Knives
- Model: Plague Hawk, also called the Plague Axe and the Plague Hawk Spike
- Type: Custom tactical tomahawk
- Overall length: 17.25 in
- Head width: 8.5 in
- Blade height: 4.1 in
- Main cutting edge: 4.5 in
- Head thickness: 1/4 in
- Handle thickness: 0.7 in
- Weight: 2 lb 10 oz
- Head steel: CPM 3V
- Head finish: Plague 3D-milled web pattern on the head flats, satin primary bevels
- Back spike: Unsharpened
- Handle: Sculpted black G10 with integrated lanyard hole
- Hardware: Flush-mounted Torx screws
- Sheath: Carbon Fiber pattern Kydex
- Condition: Preowned, excellent, no signs of wear
- Included: Carbon Fiber pattern Kydex sheath; no Certificate of Authenticity
- SKU: 00253-RB-PLAGUEHAWK-3DMILLED-CPM3V
Video Description: A 2013 Knives Illustrated Featured Hawk
Barrett has stopped taking orders, so his hawks reach collectors when he lists a finished piece or an owner sells one. On a hawk like this, a collector judges the milling first. He checks how cleanly the web meets the bevels, and how deep the relief runs. Still photographs flatten that depth. Moving video shows the ridges rise against the cells as the light shifts. Featured in the
Frequently Asked Questions
Why is it called the Plague Hawk, Plague Axe or Plague Hawk Spike?
Plague is the name of the 3D-milled web pattern on the head. Knives Illustrated called the design his Plague Hawk, and a caption there gave Barrett’s own name for it, Plague Hawk Spike. Collectors also know it as the Plague Axe, so all three names point to the same design.
Is this the Rick Barrett Plague Hawk shown in Knives Illustrated?
No. The magazine hawk was the only Plague Hawk Barrett gave a sharpened back spike, and he kept it. This one shares the design and the article’s 1/4 inch 3V stock, but its spike has no edge.
Is the Plague Hawk a tomahawk or a battle axe?
Knives Illustrated said it borders on being a battleaxe, and that some would argue it is. This one runs 17.25 inches overall and weighs 2 lb 10 oz. Still, it keeps the tomahawk form, with a single bit opposite a back spike.
Is CPM 3V stainless, and how should I care for the head?
No. CPM 3V carries about 7.5% chromium, below the roughly 13% that makes a steel stainless, so it can rust if neglected. Wipe the head down after handling, and give it a light coat of oil from time to time.
What makes this a true custom tomahawk?
A true custom comes from one maker who designs and builds it in his own shop, not from a factory. Barrett’s own biography describes exactly that kind of shop: his own forge, his own smelter and no apprentices. The Plague Hawk is his own design. Our guide to choosing a custom knife covers what else to weigh.
How can a collector buy a Rick Barrett tomahawk today?
Barrett no longer takes orders. His own site lists finished pieces on its Available page, first come, first served, and it offers a mailing list. In 2013 Knives Illustrated also placed him at two shows a year, the Badger Show and Blade Show. Otherwise, his pieces change hands between collectors, as this one has.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Rick Barrett Plague Hawk
We have inspected this Rick Barrett Plague Hawk and describe it as it is: preowned and excellent, with its Kydex sheath and no Certificate of Authenticity. Follow his work on our Rick Barrett Custom Knives page. And if you are refining a collection of your own, we also buy knife collections.















Reviews
There are no reviews yet.