Reese Weiland Hornet: A Custom Double-Action Automatic Prototype
Reese Weiland’s interest in knives began when he was 12, thanks to an uncle who made knives out of old saw blades. The Reese Weiland Hornet comes from much later in that story. It is a custom double-action automatic from a maker who has built automatics for most of his career.
This one is also a marked prototype, and it carries a smaller hawkbill than Weiland’s full-size Hawk models. That smaller size is exactly what draws collectors to it.
Reese Weiland, From Saw Blades to Automatics
His uncle was an amateur archaeologist, and those saw blade knives started everything. A book on knifemaking followed one Christmas, and his first sword came from scrap metal. Weiland then joined the Knifemakers’ Guild in 1988, and the following year he made his first folding knife.
Today he works out of Riverview, Florida, and folders make up more than 90 percent of his output. He has made knives for more than 44 years and automatics for 42 of them. Designer Joel Pirela even commissioned him to build the first prototypes of what became the Microtech Kestrel.
Our 1989 Reese Weiland Wasp, a hawkbill folder, comes from the year he built his first folder.
The Reese Weiland Hornet, a Smaller Hawkbill
Weiland’s signature is the curved hawk blade, and his best-known models carry it: the Leopard, the Wasp, the Rastor and the Harpy. The Hornet carries it in a more compact frame. Arizona Custom Knives listed a Hornet hawkbill in Devin Thomas Damascus and Mammoth as early as 2004.
Knife Purveyor has listed a Hornet liner lock at 7 1/4 inches open, with a 3 1/8 inch blade. This one stays close to that size. Weiland typically builds his Hawk models full size, so a Hornet’s smaller hawkbill sets it apart. For the full-size knife, compare our Reese Weiland Hawk Gen II automatic.
The Reese Weiland Hornet Prototype Mark
Inside the handle, on the spine at the butt, Weiland engraved RW PROTO. He used the same mark inside the handle of our Reese Weiland XL Bat Prototype.
A prototype is a maker’s working build of a design, so it can differ from anything that follows. This Hornet is a double-action prototype. It opens by hand like a folder, or it fires from the button like an automatic.
Reese Weiland Hornet Blade in Mirror-Polished Nitro-V
The Reese Weiland Hornet blade is a hawkbill, polished to a mirror, with three graduated holes cut along the spine. It runs 3.35 inches, and its 3.3 inch edge curves inward like a talon. So it draws material into the cut and works on the pull stroke.
The steel is Nitro-V, a stainless knife steel that New Jersey Steel Baron introduced in 2017 with Buderus. It starts from AEB-L, a stainless first made for razor blades, and adds nitrogen and a little vanadium. For Nitro-V on a fixed blade, see our Scorpion 6 Storen.
Double Action: Thumb Stud or Button, Then a Liner Lock
This Hornet is a D/A, for double action. Push the stepped thumb stud and the blade opens by hand, like a manual folder. Press the flush-mounted button on the show side, and the blade fires open on its own.
Either way, a Titanium liner lock then holds it open. On this example it fires crisply, and the lock engages with no play. A mosaic pin caps the pivot on both sides.
Mammoth Molar Over Jeweled Blue Titanium
The scales are Mammoth molar. Beneath them, Titanium liners carry engine-turned jeweling and a blue anodized finish, which shows as a blue line along each edge. A fileworked Stainless Steel backspacer closes the spine, with scallops cut along its length.
For Mammoth molar on another custom, see our Shane Atwood Skally Wag V2. There it pairs with Timascus, while here it sits against blue Titanium and a mirror-polished blade.
Condition and What Is Included With This Reese Weiland Hornet
This Reese Weiland Hornet is preowned and in excellent condition, with no signs of wear or blemishes. It fires crisply, and the lock engages with no play. It came to us from a collector.
It ships with a knife pouch and a Certificate of Authenticity from Reese Weiland. Read how we document provenance.
- Reese Weiland Hornet Double-Action Automatic Prototype
- Knife pouch
- Certificate of Authenticity (COA) from Reese Weiland
Reese Weiland Hornet Specifications
The prototype marking comes from Weiland’s engraving inside the spine. Browse the rest of our automatic knives.
- Maker: Reese Weiland Custom Knives, Riverview, Florida
- Model: Hornet Double-Action Automatic Prototype
- Type: Custom prototype, double-action automatic
- Markings: RW PROTO, engraved inside the spine
- Country of origin: USA
- Overall length: 7.32 in
- Blade length: 3.35 in
- Cutting edge: 3.3 in
- Closed length: 4.4 in
- Weight: 4.9 oz
- Blade steel: Nitro-V
- Blade finish: Mirror polished
- Blade profile: Hawkbill with three graduated spine holes
- Action: Double action: manual by thumb stud, automatic by button
- Deployment: Stepped Stainless Steel thumb stud; flush-mounted firing button on the show side
- Lock: Liner lock
- Pivot: Mosaic pin
- Scales: Mammoth molar
- Liners: Titanium, jeweled (engine-turned) and blue anodized
- Backspacer: Fileworked Stainless Steel
- Pocket clip: None
- Condition: Preowned, excellent, no signs of wear or blemishes; fires crisply, lock engages with no play
- Included: Knife pouch and Certificate of Authenticity (COA) from Reese Weiland
- SKU: 00254-RW-HORNET-DAPROTO-MAMMOTHMOLAR
Video Description: A Rare Size & Double-Action by the Godfather of the Automatic
On a double-action knife, a collector wants to see both openings. One is the blade carried open by hand, and the other is the blade fired from the button. He also judges how cleanly the liner lock catches each time. Still photographs cannot show any of that. Moving video can, and it follows the mirror polish around the curve of the hawkbill as well.
Frequently Asked Questions
What does double action mean on the Reese Weiland Hornet?
It means the blade opens two ways. Push the thumbstud and it opens by hand, like a manual folder. Press the button on the show side and it fires automatically. Either way, a linerlock holds it open, and you push the liner aside to fold it closed by hand.
What does RW PROTO mean?
RW PROTO is Weiland’s prototype mark, engraved here inside the spine at the butt. A prototype is a maker’s working build of a design, so it can differ from later versions. His XL Bat Prototype carries the same mark.
How does the Hornet compare with Weiland’s full-size Hawk?
The Hornet is the smaller knife, with a smaller hawkbill. Weiland typically builds his Hawk models full size, so that smaller blade is what makes a Hornet desirable to collectors. This one measures 7.32 inches open and weighs 4.9 ounces.
When was this Hornet made?
No build date is recorded. Still, the blade is Nitro-V, which New Jersey Steel Baron introduced in 2017, so this Hornet dates from 2017 or later. The model itself goes back further, since Arizona Custom Knives listed a Hornet in 2004.
What is Nitro-V steel?
Nitro-V is a stainless knife steel based on AEB-L, which Uddeholm first made for razor blades. New Jersey Steel Baron added nitrogen and a small amount of vanadium for better wear and corrosion resistance, while keeping a fine grain. It sharpens easily and holds a thin, keen edge.
What makes this a true custom automatic?
A true custom comes from one maker who designs and builds it in his own shop, not from a factory. Weiland designed the Hornet, built this double-action prototype, and engraved his own mark inside it. Then he backed it with his own Certificate of Authenticity.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Reese Weiland Hornet
We have inspected this Reese Weiland Hornet and describe it as it is: a double-action prototype in excellent condition, with its pouch and a COA from Reese Weiland. See more of his work on our Reese Weiland Custom Knives page. And if you are thinning a collection of your own, we also buy knife collections.
Automatic Knife Legal Notice
This is an automatic knife. Laws governing purchase, possession, and carry vary by state, county, and municipality.
The buyer must know and follow the laws that apply where they live before ordering. We do not give legal advice. For current state-by-state information, consult the American Knife and Tool Institute.
Woolly Mammoth Tooth Compliance Notice
The mammoth material on this knife is fossil woolly mammoth tooth. Tooth is enamel and dentine rather than tusk, and it is not ivory. No living or endangered animal is involved.
Several states restrict the sale and possession of ivory materials. Some of those statutes are written broadly enough that a buyer should confirm how their own state treats fossil mammoth material of any kind. It is the buyer’s responsibility to know the laws in their jurisdiction.












Reviews
There are no reviews yet.