Larry Pridgen Tomahawk: A Maker’s Maker at His Own Forge
If you have ever built a knife from a Jantz Supply blade, Larry Pridgen may have ground it. Since 2014 he has served as master bladesmith for Jantz, grinding and sharpening thousands of blades that other makers finish. This Larry Pridgen tomahawk, by contrast, comes from his own bench in Fitzgerald, Georgia.
It is a traditional hawk, hand-forged in twist Damascus and hung on a haft of curly tiger maple. He stamped his circled P on one cheek.
Larry Pridgen, Master Bladesmith
Pridgen’s career spans decades. He built his name on exacting grind geometry, careful heat treatment and a command of Damascus steel. His custom hunting knives, daggers and tomahawks drew early acclaim, and his work appeared often in major knife publications through the 2010s.
In 2014 he joined Jantz Supply, the knifemaking supplier in Davis, Oklahoma, as its master bladesmith. Jantz is still a very active name in the knife world. He is a maker’s maker in the truest sense: collectors and fellow knifemakers alike respect his command of metallurgy and blade geometry.
His own customs pair natural handle materials, such as Mammoth, giraffe bone and curly maple, with mosaic or twist Damascus. For the wider circle he works in, read our guide to master custom knifemakers.
Brad Vice and Alabama Damascus
Pridgen and Master Smith Brad Vice go back a long way. Their partnership began in their early years exhibiting at the Knifemakers’ Guild show. Today many of the blades Pridgen grinds for Jantz come straight from Vice’s forge.
Pridgen also uses Vice’s Alabama Damascus often for his own builds. It is a folded blend of 5160, 203E, 52100 and 15N20. No record shows whether this head’s billet came from Vice’s forge, though. For Brad Vice’s Damascus on a custom automatic, see our Reese Weiland Large Rastor.
The Larry Pridgen Tomahawk Head in Twist Damascus
The Larry Pridgen tomahawk head is hand-forged twist Damascus. To make the pattern, a smith twists a hot layered bar and then forges it flat again. Etching then brings out the layers, which run here in swirls of silver and charcoal across both cheeks.
The bit has a beard, so its lower edge sweeps down well below the eye. Its 3.5 inch cutting edge carries a high-polish finish, bright against the etched steel. The back of the head is plain, with no spike. For twist Damascus on a folding knife, compare our Mel Pardue engraved tanto.
Pridgen’s circled P sits on one cheek, between the eye and the bit. The other cheek carries no mark.
Curly Tiger Maple Haft and Tomahawk Fit
The haft is curly tiger maple. Its wavy grain gives the stripes that earn the name, and they shift as light moves across the wood. In a few places the figure shows as small pale flecks, and those flecks belong to the wood itself.
Like a classic tomahawk, the haft passes through the eye from the top. It swells from 3.25 inches around at the butt to 4 inches at the head, so its wide end wedges in the eye and holds the head fast. That end shows inside the teardrop eye, and the butt itself is plain and rounded.
Overall, it runs 19.5 inches and weighs 1 lb 3 oz. For a custom hawk built a different way, see our Half Face Blades Bleeding Heart Hawk, with dyed giraffe bone and teak.
Condition and What Is Included With This Larry Pridgen Tomahawk
This Larry Pridgen tomahawk comes to you preowned and in excellent condition. It reached us from a collection, and no one recorded its build date. Before you compare it with other hawks, read how we grade condition.
It ships as the tomahawk alone, with no sheath and no Certificate of Authenticity.
- Larry Pridgen custom traditional tomahawk
Larry Pridgen Tomahawk Specifications
See the other hawks that have come to us from collections among our preowned tomahawks.
- Maker: Larry Pridgen, Larry Pridgen Custom Knives, Fitzgerald, Georgia
- Model: Traditional Tomahawk
- Type: Custom traditional tomahawk
- Date made: Not recorded
- Overall length: 19.5 in
- Cutting edge: 3.5 in
- Haft circumference: 3.25 in at the butt, 4 in at the head
- Weight: 1 lb 3 oz
- Head: Hand-forged twist Damascus, bearded bit, no back spike
- Edge: High-polish
- Haft: Curly tiger maple, passed through the eye from the top (tomahawk fit)
- Maker’s mark: Circled P, stamped on one cheek
- Condition: Preowned, excellent
- Included: The tomahawk only; no sheath, no Certificate of Authenticity
- SKU: 00255-LP-TRADHAWK-CURLYMAPLE-TWISTDAM
Video Description: A Glimpse of the Past in Your Hand
To truly understand the effectiveness and enduring design principles of a traditional tomahawk, you only need to hold this Larry Pridgen custom in your hand. The materials are the second part of the story, Twist Damascus is hard to judge from a still photograph. When a head like this turns in the light, its layers trade places, silver rising where charcoal sat a moment before. The polished edge flashes against the etched steel, and the stripes in the maple roll the same way. Collectors want to see that movement before they buy. So judge this Larry Pridgen tomahawk in motion.
Frequently Asked Questions
What is the circled P on the head?
It is Larry Pridgen’s maker’s mark. He marks his custom knives and tomahawks with a circled P, and on this hawk he stamped it into one cheek of the twist Damascus head.
Is this head Alabama Damascus from Brad Vice’s forge?
Nothing documents that. Pridgen often builds with Vice’s Alabama Damascus, and many blades he grinds for Jantz Supply come from Vice’s forge. Still, nothing with this tomahawk records where its billet came from.
What is twist Damascus?
It is pattern-welded steel made by twisting a hot layered bar, then forging it flat again. Grinding cuts across the twisted layers, and etching makes them visible. That is where the flowing swirls on this head come from.
What is curly tiger maple?
Curly maple, also called tiger maple, is maple whose grain runs in waves. Those waves reflect light unevenly, so the wood shows bands that seem to move as you turn it. The pale flecks on this haft belong to that figure.
How is the head fitted to the haft?
As on a classic tomahawk, the haft passes through the eye from the top. It grows thicker toward the head, so its wide end wedges in the eye and holds the head fast. You can see that end inside the teardrop eye.
What makes this Larry Pridgen tomahawk a true custom?
A true custom comes from one maker who forges and finishes it in his own shop, not from a factory. Pridgen forged this head himself and stamped it with his own mark. Our guide to choosing a custom knife covers what else to weigh.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Larry Pridgen Tomahawk
We inspected this Larry Pridgen tomahawk before listing it, and it is exactly as described: preowned, excellent and sold as the tomahawk alone. More of his work is on our Larry Pridgen Custom Knives page. And if you have custom pieces of your own to place, we buy knife collections as well.













Reviews
There are no reviews yet.