Custom Knife Factory Asymmetric: Where CKF Began
Long before Custom Knife Factory had dozens of models with makers around the world, it made just one. That first CKF model was the Asymmetric, designed by the Russian knifemaker Alexey Konygin. This Custom Knife Factory Asymmetric is one of the early Special Editions, and it carries a number on its clip.
True to its name, the two sides don’t match. Jigged Carbon Fiber, streaked with gold resin, covers the show side. On the other side, a blasted and heat-anodized Titanium frame lock does the work.
Alexey Konygin and the First CKF Model
Alexey Konygin came onto the custom scene in Russia around 2011. His early Decepticon folders took their name from the Transformers, and his designs have stayed angular and bold ever since. The Asymmetric brought that look to a factory build.
Custom Knife Factory, founded by Mikhail “Mike” Kulygin, licenses designs from custom makers and builds them with manufacturing partners overseas. Since the Asymmetric, CKF has worked with makers such as Peter Rassenti, Rotten Design, Bob Terzuola and Philippe Jourget. For a later CKF collaboration, see our CKF Capitalist 43.
CKF numbered its main Asymmetric edition out of 300, with a satin S90V blade and stonewashed Titanium. Only the limited editions in the run carried numbers, and this Special Edition carries #19 on its clip. It dates from 2014.
The Custom Knife Factory Asymmetric Blade in CPM S35VN
The Custom Knife Factory Asymmetric blade looks like Damascus, but it isn’t. It is a single piece of CPM S35VN, marked S35VN on the tang beside the flipper tab. An etched Damascus pattern covers both sides, so the blade keeps the stainless powder steel’s edge holding and resistance to rust.
The blade is a flat-ground drop point, 4 1/8 inches long. On the show side, the CKF monogram sits near the spine, just ahead of the handle. It opens on a flipper tab and runs on ceramic ball bearings.
Jigged Carbon Fiber and Heat-Anodized Titanium
Jigged Carbon Fiber with a yellow and gold resin matrix forms the show side scale. Deep grooves run its length, so the gold shows as bright streaks against the black weave. Chamfered edges finish it, and gold-toned Torx screws hold it in place.
The lock side is solid Titanium, contoured and blasted, then heat-anodized in mottled gold, violet and blue. The milled Titanium clip carries the same coloring, engraved with the CKF logo and #19. Between the two sides, a layered backspacer of heat-anodized Titanium closes the spine.
Weighing in at 6.0 ounces, it is a substantial knife in the hand. For a CKF one-off with a different maker, compare our CKF Veksha One-Off.
Condition and What Is Included With This Custom Knife Factory Asymmetric
This Custom Knife Factory Asymmetric is in excellent condition, with no signs of wear or blemishes. It came to us from a noted collector. Before you compare it with other early CKF pieces, see how we grade condition.
It ships in its original soft case, sewn in orange, light blue and gray panels with a woven CKF label. This was the first case CKF issued with its knives, and we have not seen another in this color palette. An original case adds to a piece’s provenance.
- CKF Asymmetric Special Edition, Serial No. 19
- Original CKF soft case in orange, light blue and gray
Custom Knife Factory Asymmetric Specifications
See the rest of our collector folding knives.
- Maker: Custom Knife Factory (CKF)
- Designer: Alexey Konygin
- Model: Asymmetric (Special Edition), Alexey Konygin / CKF collaboration
- Serial: #19, engraved on the clip beside the CKF logo
- Type: Factory custom flipper, frame lock
- Date made: 2014
- Overall length: 9 5/8 in
- Blade length: 4 1/8 in
- Closed length: 5 7/16 in
- Weight: 6.0 oz
- Blade steel: CPM S35VN, marked S35VN on the tang
- Blade: Flat-ground drop point with a full-coverage etched Damascus pattern; CKF monogram on the show side
- Show side: Jigged Carbon Fiber with a yellow and gold resin matrix
- Lock side: Contoured, blasted and heat-anodized solid Titanium frame lock
- Clip: Milled, heat-anodized Titanium, engraved with the CKF logo and #19
- Backspacer: Layered heat-anodized Titanium
- Action: Flipper tab on ceramic ball bearings
- Condition: Excellent, no signs of wear or blemishes
- Included: Original CKF soft case in orange, light blue and gray
- SKU: 00260-CKF-ASYMMETRIC-19-S35VN-20140101
Video Description: The Beginning of CKF, The Asymmetric
Every brand that collectors follow has a starting point, and for CKF it is this knife. Turning the knife shows what photos can only hint at: the gold streaks shifting in the jigged scale, the etched pattern catching light along the blade, and the heat colors moving across the frame. So watch this Custom Knife Factory Asymmetric open, close and turn before you decide.
Frequently Asked Questions
Is this Custom Knife Factory Asymmetric a true custom?
Not in the strict sense. A true custom is made by hand, start to finish, by one maker. CKF licenses Konygin’s design and builds it with manufacturing partners. We call this one a factory custom because its Damascus-pattern blade, jigged scale and heat-anodized Titanium set it well apart from the standard run. Our guide to choosing a custom knife explains the difference.
Is the blade Damascus?
No. The blade is a single piece of CPM S35VN, a stainless powder steel, and it carries an S35VN mark on the tang. The Damascus pattern sits only on its surface, as an etch.
Where are CKF knives made?
Custom Knife Factory is a Russian company. It licenses designs from custom makers, such as Alexey Konygin, and has them built by overseas manufacturing partners.
What does the #19 on the clip mean?
It is this knife’s serial number. In the Asymmetric run, only the limited editions carried numbers, so the #19 beside the CKF logo marks it as one of them.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Custom Knife Factory Asymmetric
We inspected this Custom Knife Factory Asymmetric before listing it, and it is exactly as described: excellent, numbered and complete with its original soft case. See more from the brand on our Custom Knife Factory (CKF) page. And if you have early CKF pieces of your own to place, we also buy knife collections.













Reviews
There are no reviews yet.