Billy Mace Imel Ironwood Dagger: Built by a Hall of Fame Machinist
The Billy Mace Imel Ironwood Dagger comes from a man who learned precision long before he made knives. For decades, Imel earned his living as a professional tool-and-die maker in New Castle, Indiana. He joined the Knifemakers’ Guild in 1973. Later he built presentation knives for Vice President George H.W. Bush, in 1983, and for President Ronald Reagan.
This one is a custom integral dagger, with its blade, guard and tapered tang milled from a single bar of 440C. Figured Desert Ironwood scales ride the tang, and Chris Kravitt of Treestump Leather made the tooled sheath. It came to us as part of a collection, in excellent condition.
A Machinist’s Craft, Without CNC
Imel brought a tool-and-die maker’s tolerances to the knife, but he never handed the work to a CNC machine. He relied on conventional machinery and hand-guided grinding instead. As a result, his yearly output stayed very small, and every piece shows the hand that made it.
In 2021, Billy and his wife, Beverly, entered the BLADE Magazine Cutlery Hall of Fame together. They were the first pair ever inducted at the same time. His work also sits on permanent display at the Smithsonian Institution in Washington, D.C. For his work in Mammoth Tooth, see our Billy Mace Imel integral interframe dagger.
An Integral Guard and an Aggressively Tapered Tang
An integral knife leaves no room for error. Imel milled and hand-filed the blade, guard and tang from one continuous bar of steel. So a single mistake late in the work would have ruined the whole piece. In return, the guard and blade share one unbroken surface, with no joint to open over the years.
Seen from the spine, the tang narrows sharply from the thick guard to the butt. That taper removes steel where the hand needs none, so the dagger weighs less and balances at the guard. Imel engraved his full name along that spine. Our Jerry Hossom Crown Jewel shows a full tapered tang on a much larger fighter.
Billy Mace Imel Ironwood Dagger Blade and Mirror Polish
The Billy Mace Imel Ironwood Dagger carries a 5.5 inch double-edged blade with a 5.4 inch cutting edge. Deep, symmetrical hollow grinds run down both faces and meet at a central ridge. That ridge stays razor-straight the whole length of the blade, all the way to the needle point.
The bevels and the integral guard wear a high-luster mirror polish, a hallmark of Imel’s hand finishing. The steel is 440C, a high-carbon Stainless Steel that hardens to about 60 on the Rockwell C scale. Even so, it still resists corrosion, which suits a dagger meant to keep its polish.
Figured Desert Ironwood and a Chris Kravitt Sheath
The 4 inch handle is figured Desert Ironwood, 0.73 inch thick and shaped to swell behind the guard and again toward the butt. Three flush, polished pins hold the scales to the tang and stand out bright against the dark wood. Our Bill Coffey custom folding dagger pairs the same wood with Damascus.
Chris Kravitt of Treestump Leather in Waltham, Maine, made the sheath. It carries black accents, a tooled border and double stitching, with a belt loop and his stamp on the back. Kravitt also made the sheath for our other Imel dagger.
Condition and What Is Included With This Billy Mace Imel Ironwood Dagger
This Billy Mace Imel Ironwood Dagger is in excellent condition, with no wear or blemishes. Our grading standards explain what that means here. We purchased it in a collection. There is no Certificate of Authenticity.
- Billy Mace Imel Custom Integral Dagger, tapered tang, 440C, Desert Ironwood scales
- Custom tooled leather sheath by Chris Kravitt, Treestump Leather, Waltham, Maine
Billy Mace Imel Ironwood Dagger Specifications
The maker’s name comes from his engraving along the spine of the tang, and the sheath maker from his stamp. Browse the rest of our fixed blade knives.
- Maker: Billy Mace Imel, New Castle, Indiana
- Model: Custom Integral Dagger (Tapered Tang)
- Type: Custom fixed blade dagger, integral construction
- Construction: Blade, guard and tapered tang from one bar of steel
- Markings: Billy Mace Imel, engraved along the spine of the tang
- Country of origin: USA
- Overall length: 9.9 in
- Blade length: 5.5 in
- Cutting edge: 5.4 in
- Handle length: 4 in
- Handle thickness: 0.73 in
- Weight: 4.7 oz (7 oz with sheath)
- Blade steel: 440C
- Blade profile: Double-edged dagger with a needle point
- Grind: Deep, symmetrical hollow grinds on both sides of a central ridge
- Finish: High-luster mirror polish on the bevels and guard
- Guard: Integral, with sweeping quillons
- Handle: Figured Desert Ironwood scales, three flush polished pins
- Sheath: Tooled leather by Chris Kravitt, Treestump Leather, Waltham, Maine
- Condition: Preowned, excellent, no wear or blemishes
- Included: Chris Kravitt leather sheath; no Certificate of Authenticity
- SKU: 00245-BMI-INTEGRALDAGGER-TAPERTANG-IRONWOOD
Video Description: Hall of Fame Dagger Execution
Few makers have earned a place in both the Smithsonian and the Cutlery Hall of Fame. A dagger by one of them belongs near the center of a serious American collection. Turning the knife slowly is the honest way to judge it, because a mirror polish hides nothing. Any flaw in the finish shows the moment light moves across the steel.
Frequently Asked Questions
What is a tapered tang?
A tapered tang is a tang that thins steadily from the guard to the butt. The maker grinds away steel the hand never needs, so the knife loses weight and its balance moves forward toward the guard. It takes more time and care than a flat tang, and collectors read it as a sign of a maker’s skill.
What is Desert Ironwood?
Desert Ironwood is a dense, naturally oily hardwood from the Sonoran Desert. It is dense enough to sink in water, and its oils help it resist moisture. Each piece carries its own dark, swirling figure, so no two handles ever match.
Did Billy Mace Imel use CNC machines?
No. Imel built his knives on conventional machinery and finished them with hand-guided grinding. That is why his output stayed small, and why each integral reflects hours at the grinder rather than a programmed cut.
Who is Chris Kravitt?
Chris Kravitt is the leatherworker behind Treestump Leather in Waltham, Maine. His round stamp, with his signature at its center, sits on the back of this sheath. He made a tooled sheath with black accents to fit this dagger exactly.
Is the Billy Mace Imel Ironwood Dagger a true custom?
Yes. Imel designed and built it himself, from milling the bar to the final hand polish. An integral like this cannot be assembled from stock parts, so every one is a piece of his own work.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Billy Mace Imel Ironwood Dagger
We inspected this Billy Mace Imel Ironwood Dagger and described it as it is: an integral custom dagger in excellent condition, with its Chris Kravitt sheath. See more of his work on our Billy Mace Imel Custom Knives page. And if you are refining a collection of your own, we also buy knife collections.
















Reviews
There are no reviews yet.