Hog House Fade Honeycomb Model T Gen 2, Serial No. 474
Hog House Knives works out of an old piggery in Pöytyä, in southwest Finland. Inside it, Tapio Syrjälä and Viljami Salonen make their knives, so the shop’s name is no metaphor. This Hog House Fade Honeycomb is one of their second-generation Model T flippers, a mid-tech made in that shop and signed off by both of them.
Serial No. 474 came to us directly from Hog House at Blade Show West 2026. It is new and complete, with its presentation box, its Certificate of Authenticity and the driver bits for its slotted screws. The certificate dates it to September 2026.
Two Makers and an Old Piggery in Pöytyä
Hog House began in 2021, and the inside of the box lid still reads EST 2021. Tapio Syrjälä made his first knife in 2014 and became a master bladesmith in 2018. Viljami Salonen, meanwhile, trained as a goldsmith and has worked in metal since 2010.
So the shop pairs a bladesmith with a goldsmith. On this knife, that shows in the step-milled bevel and in the bearing cages they machine in house.
What Changed on the Model T Gen 2
The Gen 2 is the second generation of the Hog House Model T. For it, the makers made the knife slightly taller and longer. They also thinned the blade stock to make it a better slicer.
Serial No. 474 measures 8.07 inches open, with a 3.5 inch blade, and 4.56 inches closed. It weighs 3.17 ounces, with a 6Al-4V Titanium frame and Titanium hardware.
RWL-34 at 62 HRC With a Step-Milled Bevel
The blade is RWL-34, a powder metallurgy Stainless Steel made by Damasteel AB in Söderfors, Sweden. It follows the ATS-34 and 154CM recipe in powder form, and its name honors Robert Waldorf Loveless. This blade runs at 62 HRC.
For the same steel from another maker, see our Anton van der Westhuizen Boudicca in RWL34. And for the conventional steel that RWL-34 refines, our Tim Britton T-10 framelock flipper in ATS-34 makes a fair comparison.
Hog House mills the drop point’s main bevel in tiers, so fine stepped lines run its length toward the tip. Above them, an elongated fuller runs under the spine just ahead of the pivot. The cutting edge measures 3.36 inches.
The Hog House Fade Honeycomb Milling
Both sides of the 6Al-4V Titanium frame carry hexagonal cells, and fine milled lines fill each one. The certificate names the pattern Fade Honeycomb, and the cells do fade. They stand crisp near the pivot, then soften toward the butt.
The texture also carries faintly onto the milled pocket clip. Meanwhile, a Titanium backspacer closes the spine, and Titanium screws hold the frame together. On the show side, the pivot collar carries the Hog House logo. For another milled Titanium handle, see our Curtiss Warhawk in milled and torched Titanium.
Frame Lock, Ceramic Bearings and In-House Cages
A flipper tab opens the blade, and a Titanium frame lock holds it open. The lockbar meets the blade through a Steel interface with an integrated overtravel stop. So Steel, not Titanium, meets the blade tang, and the lockbar cannot travel too far.
Inside the pivot, Ceramic bearings turn in cages that Hog House makes in its own shop. A Ceramic detent ball then holds the blade closed. For another bearing flipper, see our Andre Thorburn L48 flipper with IKBS.
Condition and What Is Included With This Hog House Fade Honeycomb
This Hog House Fade Honeycomb is new, and it came straight from the makers. Our grading standards explain how we describe condition. It also joins our other knives bought direct from the maker.
Tapio Syrjälä and Viljami Salonen both signed its Certificate of Authenticity. It records the serial number 474, the model as T gen.2 and Fade honeycomb under Other.
- Hog House Model T Gen 2, Fade Honeycomb, Serial No. 474
- Original Hog House presentation box
- Certificate of Authenticity, signed by Tapio Syrjälä and Viljami Salonen
- Driver bits for the pivot and body screws
Hog House Fade Honeycomb Specifications
The serial number, model and build date come from the Certificate of Authenticity. Browse the rest of our folding knives.
- Maker: Hog House Knives (Tapio Syrjälä and Viljami Salonen), Pöytyä, Finland
- Model: Model T Gen 2 With Honeycomb Fade Milling Pattern
- Serial number: 474
- Date: September 2026
- Type: Mid-tech folding knife, flipper
- Country of origin: Pöytyä, Finland
- Overall length: 8.07 in
- Blade length: 3.5 in
- Cutting edge: 3.36 in
- Closed length: 4.56 in
- Weight: 3.17 oz
- Blade steel: RWL-34 powder metallurgy Stainless Steel, 62 HRC
- Blade profile: Milled drop point with a multi-tier step-milled main bevel and an elongated fuller
- Deployment: Flipper tab
- Lock: Titanium frame lock with a Steel lockbar interface and an integrated overtravel stop
- Pivot: Ceramic bearings in custom in-house cages, Ceramic detent ball
- Handle: 6Al-4V Titanium frame, Fade Honeycomb milling
- Hardware: Titanium screws, backspacer and pivot
- Pocket clip: Milled
- Condition: New, direct from the maker at Blade Show West 2026
- Included: Original Hog House presentation box, Certificate of Authenticity signed by both makers, driver bits for the pivot and body screws
- SKU: 00251-HHK-MODELT-GEN2-474-FADEHONEYCOMB-20260901
Video Description: Finnish Precision in Honeycomb Fade
Milled Titanium is hard to judge from a still photograph. A pattern like this only reads properly as light moves across it, and a fade depends on that movement. Collectors also judge a flipper by its action and lockup, which no photograph captures. That is why moving video matters for a piece like this Hog House Fade Honeycomb. Watch the texture and the mechanism together.
Frequently Asked Questions
What is the Hog House Fade Honeycomb?
Fade Honeycomb is the milling pattern Hog House lists on this knife’s Certificate of Authenticity. Hexagonal cells cover both sides of the Titanium frame, crisp near the pivot and fading toward the butt. Here it dresses the Model T Gen 2.
How does the Model T Gen 2 differ from the first generation?
Hog House made the Gen 2 slightly taller and longer than the original Model T. It also uses thinner blade stock, which makes it a better slicer on the same platform.
What is RWL-34 Steel?
RWL-34 is a powder metallurgy Stainless Steel produced by Damasteel AB in Söderfors, Sweden. Its chemistry follows ATS-34 and 154CM, and its initials honor the knifemaker Robert Waldorf Loveless. Powder production gives it a finer, more even structure than conventionally melted steel.
Is the Hog House Model T Gen 2 a mid-tech?
Yes. A mid-tech sits between a factory production knife and a handmade custom: it is precision machined, in limited numbers, by the maker’s own shop. Hog House makes the Model T Gen 2 in Pöytyä, and Serial No. 474 carries a Certificate of Authenticity signed by both makers.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Hog House Fade Honeycomb
We bought this Hog House Fade Honeycomb from the makers and describe it as it is: a new Model T Gen 2, Serial No. 474, with its box, signed certificate and driver bits. See more of their work on our Hog House Knives page. And if you are refining a collection of your own, we also buy knife collections.














Reviews
There are no reviews yet.