Hog House Veli Mini, Finnish for Brother
Veli is Finnish for brother, a fitting word from a shop run by two partners. Tapio Syrjälä and Viljami Salonen make their knives in an old piggery in Pöytyä, Finland. The Veli had been brewing in Viljami’s mind for a long time, and the aim was plain: a larger knife that still flips easily and carries well.
We bought it new, directly from Hog House at Blade Show West 2026. It is a mid-tech, and its Certificate of Authenticity carries no serial number, only a dash in the S/N field. Both makers signed it, and it dates the knife to September 2026.
Built to Be Larger and Still Slim
The Veli Mini measures 7.1 inches open, with a 3 inch blade, and 4.1 inches closed. It weighs 3.3 ounces. Even so, the frame stays slim, so a knife of this size still rides easily in a pocket.
That size sets it apart from the Hog House Model T. Both share RWL-34, a Titanium frame lock and Ceramic bearings, but the Veli Mini is the smaller of the two.
RWL-34 Modified Reverse Tanto With Micro-Milled Bevels
The blade is RWL-34, a powder metallurgy Stainless Steel from Damasteel AB in Söderfors, Sweden. Its name honors Robert Waldorf Loveless, and this blade runs at 60 to 62 HRC. Hog House shapes it as a modified reverse tanto.
Linear micro-milling runs across the primary bevels in fine parallel lines, while the flats stay satin. Above them, an elongated fuller sits just ahead of the pivot. Our Anton van der Westhuizen Boudicca in RWL34 shows the same steel in a custom build. And for another tanto on a Titanium frame lock, see our John Gray Slitter V2 MagnaCut tanto.
The Hog House Veli Mini Fade Honeycomb Frame
Both sides of the 6Al-4V Titanium frame carry Hog House’s Fade Honeycomb milling, the pattern named on the certificate. Fine milled lines fill each hexagonal cell. The cells stand crisp near the pivot, then soften toward the butt, where the texture gives way to linear milling.
The same pattern appears on our Hog House Model T Gen 2 in Fade Honeycomb, the smaller of the two. On the show side, the Veli’s pivot collar carries the Hog House logo. On the clip side, a slotted Titanium pivot sits beside the engraved Veli mark.
Hidden Hardware: Lockbar Insert and Pocket Clip
A Titanium frame lock holds the blade open, and a hardened Steel insert takes the contact where the lockbar meets the blade. Hog House fastens that insert from inside the frame, so no insert screw shows on the lock side.
The 3D machined Titanium pocket clip follows the same idea. It mounts with a hidden internal screw, rides tip-up for right-hand carry and carries linear micro-milling to match the blade. For a custom take on the Titanium frame lock, see our Reese Weiland Strike Prototype 2.
Ceramic Bearings in In-House Cages
A flipper tab opens the blade. Inside the pivot, Ceramic bearings turn in cages that Hog House makes in its own shop. Meanwhile, a Ceramic detent ball holds the blade closed until the flipper breaks it free.
The custom slotted pivot, the body screws and the backspacer are all Titanium, and so is the pocket clip. So the hardware matches the frame.
Condition and What Is Included With This Hog House Veli Mini
This Hog House Veli Mini is new, and it came straight from the makers. Our grading standards explain how we describe condition. It also joins our other knives bought direct from the maker.
The certificate lists the model as Veli Mini and the date as 9/2026, with Steel for the blade, Ti for the handle and hardware, and Fade honeycomb under Other. Tapio Syrjälä and Viljami Salonen both signed it.
- Hog House Veli Mini, Fade Honeycomb, unnumbered
- Original Hog House magnetic presentation box
- Certificate of Authenticity, signed by Tapio Syrjälä and Viljami Salonen
- Two driver bits for the pivot and body screws
- Two spare screws
Hog House Veli Specifications
The model, build date and materials come from the Certificate of Authenticity. Browse the rest of our folding knives.
- Maker: Hog House Knives, Pöytyä, Finland
- Designers: Tapio Syrjälä and Viljami Salonen
- Model: Veli (Finnish for Brother) Mid-Tech Knife
- Serial number: Unnumbered (the certificate’s S/N field carries a dash)
- Date: September 2026
- Type: Mid-tech folding knife, flipper
- Country of origin: Finland
- Overall length: 8.85 in
- Blade length: 3.74 in
- Closed length: 5.11 in
- Weight: 5.3 oz
- Blade steel: RWL-34 powder metallurgy Stainless Steel, 60–62 HRC
- Blade profile: Modified reverse tanto
- Blade finish: Linear micro-milled primary bevels, satin flats, elongated fuller
- Deployment: Flipper tab
- Lock: Titanium frame lock with a hidden, internally fastened hardened Steel lockbar insert
- Pivot: Ceramic bearings in custom in-house cages, Ceramic detent ball
- Handle: 6Al-4V Titanium, Fade Honeycomb milling
- Hardware: Titanium custom slotted pivot, body screws and backspacer
- Pocket clip: 3D machined Titanium, tip-up, right-hand carry, linear micro-milling, hidden internal screw
- Condition: New, direct from the maker at Blade Show West 2026
- Included: Original Hog House magnetic presentation box, Certificate of Authenticity signed by both makers, two driver bits, two spare screws
- SKU: 00252-HHK-VELI-FADEHONEYCOMB-RWL34-20260901
Video Description: Veli, Finnish Precision at it’s Best
Hidden hardware is easy to miss in a still photograph, because the point is what isn’t there. On the lock side of this knife, neither the lockbar insert nor the pocket clip shows a screw. Moving video lets a collector check that clean surface from every angle. It also shows how the Fade Honeycomb shifts with the light. Watch it closely before you decide.
Frequently Asked Questions
What does Veli mean?
Veli is Finnish for brother. Hog House Knives, the shop Tapio Syrjälä and Viljami Salonen run in Pöytyä, Finland, makes the Veli alongside its Model T. The Veli is the larger of the two folders.
Does We Buy Knife Collections actively support the broader knife enthusiast community?
Yes. Based in Jacksonville, Florida, We Buy Knife Collections is a curator and purveyor of fine custom made folding and fixed-blade knives. We are dedicated to the high-end custom knife community and we support knife rights advocacy.
Following our commitment upgrade in April 2026, we are proud to hold an AKTI Premier Membership, supporting the American Knife & Tool Institute’s vital advocacy and lobbying for knife owners, makers, and the future of the industry.
Buy This Hog House Veli
We bought this Hog House Veli from the makers and describe it as it is: new and unnumbered, with its magnetic box, signed certificate, driver bits and spare screws. See more of their work on our Hog House Knives page. And if you are refining a collection of your own, we also buy knife collections.











Reviews
There are no reviews yet.